Brand new RBR billet high capacity oil pump
We have a couple of these left in stock, that although a beautiful and ultimate race oil pump, they were simply too expensive for us to manufacture & resale (at our cost of £1050!!)
These are original Lucas distributors, completely rebuilt
These are original block taps, stripped, lapped / re-sealed & rebuilt
These are not reconditioned but good condition, used con rods that are sets & cleaned & checked for straightness.
It is advisable to double check for balance, bushing & sizing but they are from working / good order engines.
These are good, reconditioned & zero balanced, used 6 cylinder flywheels - Ready to fit.
They have been cleaned, re-faced & balanced. They have used but good condition ring gears to suit 4.2, 3.8 or XK engines
These are brand new / old stock military head castings.
We have a very small quantity of these that can be purchased 'as are' or supplied with relevant tappets & valves....or built to customers requirements - ie 3.8 E-Type replica etc.
These are used 4.2 / 133T ring gear RBR Superlite flywheels.
They have had very little use but are re-faced & zero balanced & have only slight markings on ring gears
This is a used 4.2 close ratio gear set
The gears are in excellent condition apart from 1st gear on cluster and reverse idler gear, which has some signs of pick up (pretty common & not a heavily loaded gear)
These are used RBR Billet Fast Road 9.5" Clutch Cover.
This has had very little use but got slightly damaged prior to complete rebuild by the manufacturer, so is mechanically perfect & ready to go.
This needs the appropriate clutch plate & release bearing.
Original Jaguar Cylinder Head Nut Sets, Not Perfect But Clean / Not Re-Chromed & Not Re-Pro!
Original 3.8 E-Type Jaguar Gearbox,
Fully reconditioned using good quality original gear sets, new counter shaft, bearing, seals & gaskets.
Original 3.8 E-Type PL 33.3 Diff Unit
Fully reconditioned using good quality C & P, new bearing, seals & gaskets.
New, Old Stock, Series 3 XJ6 Cylinder Head Casting
New, 17/8" inlet valve S3 Injection Head.